Imagine: you are an active trader on Hyperliquid, making 10 swaps per day. Each swap costs 2 HYPE (~$5) gas fee.

Gas costs:

Now imagine that you can reduce gas by 40%:

For a large trader with a volume of $1M/month:

• Gas fees can be $3,000-5,000/month
• 50% optimization = $18,000-30,000/year of savings

The good news is that Hyperliquid gas fees are much lower than Ethereum (where a single swap can cost $20-100). But optimization is still important, especially for active traders.

What you will learn in this article:

• ✅ How gas works on Hyperliquid (HYPE vs. ETH)
• ✅ Factors affecting transaction costs
• ✅ Optimal time to trade (when gas is cheaper)
• ✅ Optimization techniques: batching, gas limit, DEX
• ✅ selection Comparison of gas costs between different operations
• ✅ Gas fees✅
• monitoring tools Practical Strategies to save 30-50%

Goal: to help you minimize gas costs and increase your net profit from trading.

The Basics: What is Gas?

Gas is a fee for performing operations on the blockchain (calculations, data storage).

On Hyperliquid:

• Gas is paid in HYPE (native token)
• 1 HYPE ≈ $2.50 (price varies)
• Average swap: 1.5-3 HYPE (~$4-8)

Gas cost formula:

Where is:

• Gas Used = Number of "gas units" (depends on the complexity of the operation)
• Gas Price = Unit price of gas in HYPE (set by the network)

Example:

Simple swap USDC → ETH:

Complex multi-hop swap USDC → HYPE → ETH → ARB:

Hyperliquid vs. Ethereum gas

1. Complexity of the operation

Different operations consume different amounts of gas:

Why split-routing is more expensive:

Simple swap (1 DEX):

1. 1. Approve token (if necessary)
2. 2. Call router.swap()
3. 3. Transfer tokens

Split-routing (2 DEX):

1. 1. Approve token (if necessary)
2. 2. Call router.swapSplit()
3. - Sub-call: DEX1.swap() (60% of the order)
4. - Sub-call: DEX2.swap() (40% of the order)
5. 3. Aggregate results
6. 4. Transfer tokens

Additional operations = more gas

But: despite +30-50% to the gas cost, split-routing saves 1-5% on the price impact, which repeatedly covers the additional gas.

Example:

Swap 50,000 USDC → ETH

Single DEX:

Split-routing (Hypertrade):

2. Network congestion

The more transactions on the network, the higher the gas price.

Hyperliquid has two "peak" periods:

📈 Peak hours (high gas):

• 12:00-20:00 UTC (US/Europe afternoon session)
• Gas price: 1.2-1.5× above base

📉 Off-peak hours (low gas):

• 00:00-08:00 UTC (Asian Night)
• Gas price: 0.8-1.0× base (normal or lower)

A typical day's schedule:

Example:

Swap 10,000 USDC → ETH

Peak time (16:00 UTC):

Off-peak time (04:00 UTC):

For an active trader (10 swaps/day):

Daily Save: $18.70

Monthly Savings: $18.70 × 30 = $561

Annual savings: $561 × 12 = $6,732 💰

3. Gas limit

Gas limit is the maximum amount of gas you are willing to spend on a transaction.

Two extremes:

Optimal gas limit:

How to set gas limit in MetaMask:

1. 1. Before confirming the transaction, click "Edit" (gas settings)
2. 2. Select "Advanced"
3. 3. Set the "Gas Limit": e.g. 180,000 for simple swap
4. 4. DO NOT change the gas limit without understanding – use the recommended values

4. Priority fee (tip)

Priority fee is an additional fee to help your transaction process faster.

On Hyperliquid:

• Base fee: the mandatory part of the gas (set by the protocol)
• Priority fee (tip): optional additional payment to validators

When to use priority fee:

The best time to minimize gas

📉 Cheapest:

1. 1. Weekends (Sat-Sun) — 15-25% lower than weekdays
2. 2. Asian Night (00:00-08:00 UTC) – 20-30% below the peaks
3. 3. Holidays (Christmas, New Year) – 30-40% lower than usual

📈 Most expensive:

1. 1. Weekdays 12:00-20:00 UTC — peak activity
2. 2. Major events (FED announcements, major news) — a surge of 50-100%
3. 3. NFT mints / token launches – local surge by 200-300%

Practical strategy:

Example:

You want to buy $12,500 worth of 5 ETH

Non-urgent (you can wait 6 hours):

Urgent (the market is growing, you need to buy now):

But if ETH is up 2% in those 6 hours:

Tools:

1. Hyperliquid Explorer Gas Tracker:

• URL: https://explorer.hyperliquid.xyz/gas
• Shows: live gas price, chart for 24 hours

2. Hypertrade Gas Estimator:

• Built into https://ht.xyz
• Shows: gas cost for your specific swap

3. DeFi Pulse Gas Tracker (for comparison with Ethereum):

• URL: https://www.defipulse.com/gas

How to use:

1. 1. Check the current gas price
2. 2. If >1.3× base → wait for a decrease (if not urgent)
3. 3. If <1.0× base → a great time to trade

1. Batching

Idea: Combine multiple operations into a single transaction.

Example without batching:

Do you want:

1. 1. Approve USDC
2. 2. Swap USDC → ETH
3. 3. Transfer ETH to another wallet

3 separate transactions:

With batching:

How to use batching:

HyperCore Spot (Order Book) vs. AMM DEX (Hyperswap):

When to use limit orders:

Example:

You want to buy 50 ETH ($125,000)

Market swap (AMM):

Limit order (HyperCore Spot):

How to place a limit order:

1. 1. Upgrade to HyperCore Spot
2. 2. Select a pair (e.g. ETH/USDC)
3. 3. Set Limit order type
4. 4. Enter the price (e.g., 1 ETH = 2,480 USDC)
5. 5. Enter the quantity
6. 6. Click "Place Order"

If the market reaches your price → the order will be executed automatically (gas is already debited when placed).

Gas optimization is a habit, not a one-time action.

Follow the principles above and you'll save hundreds or thousands of dollars a year! 💰

Scenario 1: Small Trader ($1,000/month volume)

Profile:

• 10 swaps/month at $100
• Uses Hypertrade (split-routing where profitable)

Gas costs:

Price: 18 HYPE × $2.50 = $45/month ($540/year)

% of Volume: $45 / $1,000 = 4.5%

Optimization:

• Trade off-peak hours: -30% → $31.50/month ($378/year)
• Use limit orders where possible: -20% → $36/month ($432/year)
• Total savings: $108-162/year

Scenario 2: Active Trader ($50,000/month volume)

Profile:

• 50 swaps/month, average swap $1,000
• Uses Hypertrade + HyperCore Spot for Large

Gas costs:

Price: 87 HYPE × $2.50 = $217.50/month ($2,610/year)

% of Volume: $217.50 / $50,000 = 0.44%

Optimization:

• Off-peak trading: -30% → $152.25/month ($1,827/year)
• More limit orders: -15% → $184.88/month ($2,219/year)
• Total savings: $391-783/year

Profile:

• 100 swaps/month, average swap $10,000
• 80% via HyperCore Spot (limit orders)
• 20% via Hypertrade (term market swaps)

Gas costs:

Price: 138 HYPE × $2.50 = $345/month ($4,140/year)

% of Volume: $345 / $1,000,000 = 0.035%

Optimization:

• Off-peak for limit orders: -20% → $276/month ($3,312/year)
• Batching approvals: -10% → $310.50/month ($3,726/year)
• Total savings: $414-828/year

1. Hyperliquid Gas Tracker

URL: https://explorer.hyperliquid.xyz/gas

What it shows:

• Current gas price (in Gwei or HYPE/unit)
• Schedule for 24 hours / 7 days / 30 days
• Average, minimum, maximum gas price
• Forecast for the next 6 hours

How to use:

1. Check the current gas price
2. Compare with average 24h
3. If above average → wait for a decrease (if not urgent)
4. If the average is below → a good time to trade

2. Hypertrade Gas Estimator

Built into https://ht.xyz

What it shows:

• Gas cost for your specific swap
• Before Executing a Transaction

Example:

You will swap: 10,000 USDC → ETH

3. Gas Alerts (Telegram/Discord bots)

Set up notifications when the gas price drops below the threshold.

Bot example:

@HyperliquidGasBot (Telegram)

Command:

How to set up:

1. Find a bot on Telegram/Discord
2. Set threshold (e.g. 0.9× base)
3. Get notified

4. Portfolio trackers with gas analytics

CoinTracker, Koinly, Delta — show your gas costs for the period.

Example of a report:

Strategy 1: "Off-Peak Trader"

Principle: trade only during low gas hours.

Implementation:

1. 1. Identify your non-urgent swaps (e.g. DCA, rebalancing)
2. 2. Set Gas Alert (threshold: <0.95× base)
3. 3. Perform swaps only when you receive an alert

Result:

• Save 25-35% on gas
• For a trader with $50k/month volume: $600-800/year savings

Strategy 2: "Whale Limit Orders"

Principle: For large orders, always use HyperCore Spot limit orders.

Implementation:

1. 1. Large order (>$20k) → NOT market swap
2. 2. Place a limit order on HyperCore Spot at the target price
3. 3. Wait 1-6 hours for execution

Result:

• Gas savings: 30-50%
• Savings on price impact: 1,000-10,000× more than savings on gas
• For a whale with $1M/month volume: $30,000-50,000/month savings

Strategy 3: "Batch Everything"

Principle: Accumulate operations and batch.

Implementation:

1. 1. Instead of 10 small swaps ($500 each) during the day
2. 2. Accumulate → make 2 big swaps ($2,500 each)
3. 3. Use Hypertrade (split-routing is more effective for large ones)

Result:

• Gas savings: 15-25% (fewer transactions)
• Saving on price impact: split-routing is more efficient
• For active trader: $300-500/year of savings

Strategy 4: "Limited Approvals for Security"

Principle: Use limited approvals for safety, but optimize frequency.

Implementation:

1. 1. For commonly used tokens (USDC, ETH): unlimited approval
2. 2. For rare tokens: limited approval every time
3. 3. Check approvals regularly (once a month) and revoke old ones

Result:

• Balancing safety and gas economy
• Savings: $100-200/year for an active trader

Print and follow before each major swap:

Before swapping:

• • [ ] Checked the current gas price (explorer.hyperliquid.xyz/gas)
• • [ ] Is swap non-urgent? → Waiting for off-peak hours (00:00-08:00 UTC)
• • [ ] Swap >$20,000? → Reviewed limit order on HyperCore Spot
• • [ ] Checked the route in Hypertrade (Compare Routes)
• • [ ] Chose the optimal route (balance between gas and price impact)
• • [ ] Set an adequate slippage (1-2% for most couples)

Transaction parameters:

• • [ ] Gas limit: I use the recommended one (I do not change it manually)
• • [ ] Priority fee: standard (I don't overpay if it's not urgent)
• • [ ] Approval: checked if it is necessary (if the first token swap)

After swap:

• • [ ] Recorded the gas cost in the tracker (for analysis)
• • [ ] Compared with the expected (if it is very different → check the reason)
• • [ ] Marked the time (to understand gas price patterns)

Basic principles of gas saving:

1. 1. Trade off-peak hours (00:00-08:00 UTC, weekends) → save 25-35%
2. 2. Use HyperCore Spot for large orders ($>20k) → 30-50% gas savings + huge price impact savings
3. 3. Batch operations where possible → 15-25% savings
4. 4. Don't skimp on gas if it increases price impact → $2 extra gas can save $200+ on impact
5. 5. Use Hypertrade – Automatic Route Optimization and Gas Limit

Savings for different types of traders:

Start saving today:

1. 1. 🕐 Check the gas price before each swap: explorer.hyperliquid.xyz/gas
2. 2. 📊 Use Hypertrade to automatically optimize: https://ht.xyz
3. 3. 📈 For large orders, use HyperCore Spot: https://hyperliquid.xyz/trade
4. 4. ⏰ Trade off-peak wherever possible (00:00-08:00 UTC)
5. 5. 📝 Track gas costs (CoinTracker, Koinly)

Gas optimization is a habit, not a one-time action. Follow the principles above and you'll save hundreds or thousands of dollars a year! 💰

📊 Gas Monitoring:

• Hyperliquid Gas Tracker: https://explorer.hyperliquid.xyz/gas
• Hypertrade Gas Estimator: Built into https://ht.xyz

🛠️ Tools:

• Hypertrade (optimized routing): https://ht.xyz
• HyperCore Spot (limit orders): https://hyperliquid.xyz/trade
• Revoke.cash (approvals check): https://revoke.cash

📚 Documentation:

• Gas optimization guide: https://docs.hypertrade.io/gas-optimization
• HyperCore Spot docs: https://docs.hyperliquid.xyz
• Batching guide: https://docs.hypertrade.io/batching

💬 Community:

• Discord (#gas-optimization): https://discord.gg/hypertrade
• Twitter: @Hypertrade_xyz
• Telegram: @HypertradeOfficial

📧 Support:

• support@hypertrade.io
• tech@hypertrade.io